SKU: 99356
Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: This product is pre-owned and may not include the same accessories as a new, unused unit. - other accessories not shown or listed here.This autoclave was disassembled down to it's bare chassis, cleaned and rebuilt. The Reservoir Tank was cleaned and flushed and a new Reservoir Cap, Reservoir Filter and Water Pump Filter and Drain Kit upgrade were installed. Installed a new Water Pump, Air Valve Plunger, Check Valve, Safety Valve Biological Filter and Air Compressor Filter. Installed a Fascia Gasket. Cleaned the sterilizing cassette and installed a new cassette seal. Then testing this autoclave began. Levelled this sterilizer for proper cassette drying, connected it to a 120 volt power source, attached a donor condenser waste bottle, added distilled water and calibrated the autoclave. Then this sterilizer was run through all it's preset sterilizing and drying cycles. To verify that it is achieving it's maximum required sterilizing temperature during a cycle, it was temperature tested using a Max Register Thermometer, and found to exceed the required 273 F for an entire cycle.
Technician Testing Notes
This autoclave was disassembled down to it's bare chassis, cleaned and rebuilt. The Reservoir Tank was cleaned and flushed and a new Reservoir Cap, Reservoir Filter and Water Pump Filter and Drain Kit upgrade were installed. Installed a new Water Pump, Air Valve Plunger, Check Valve, Safety Valve Biological Filter and Air Compressor Filter. Installed a Fascia Gasket. Cleaned the sterilizing cassette and installed a new cassette seal. Then testing this autoclave began. Levelled this sterilizer for proper cassette drying, connected it to a 120 volt power source, attached a donor condenser waste bottle, added distilled water and calibrated the autoclave. Then this sterilizer was run through all it's preset sterilizing and drying cycles. To verify that it is achieving it's maximum required sterilizing temperature during a cycle, it was temperature tested using a Max Register Thermometer, and found to exceed the required 273 F for an entire cycle.
This autoclave was disassembled down to it's bare chassis, cleaned and rebuilt. The Reservoir Tank was cleaned and flushed and a new Reservoir Cap, Reservoir Filter and Water Pump Filter and Drain Kit upgrade were installed. Installed a new Water Pump, Air Valve Plunger, Check Valve, Safety Valve Biological Filter and Air Compressor Filter. Installed a Fascia Gasket. Cleaned the sterilizing cassette and installed a new cassette seal. Then testing this autoclave began. Levelled this sterilizer for proper cassette drying, connected it to a 120 volt power source, attached a donor condenser waste bottle, added distilled water and calibrated the autoclave. Then this sterilizer was run through all it's preset sterilizing and drying cycles. To verify that it is achieving it's maximum required sterilizing temperature during a cycle, it was temperature tested using a Max Register Thermometer, and found to exceed the required 273 F for an entire cycle.
Product Condition
- Manufacturer: SciCan
- Model: STATIM 2000
- Serial Number: 100209K00098
- Power Requirements: 110V
- Year: 2009
- Sterilizer Type: steam cassette
- Timer Function: features a timer with a variety of cycle options
- Controls: digital control display
- Chamber Depth: N/A
- Chamber Diameter: N/A
- Number of Trays: 1 tray
- Cycle Count: 3,400
Item Includes:
1 - SciCan STATIM 2000 Steam Cassette Autoclave 1 - Sterilizing Cassette w/ Rack and new Cassette Seal installed 1 - Condenser Waste Bottle 1 - Power Cord
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
1 - SciCan STATIM 2000 Steam Cassette Autoclave 1 - Sterilizing Cassette w/ Rack and new Cassette Seal installed 1 - Condenser Waste Bottle 1 - Power Cord
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
Shipping calculated at checkout.
30 Day Return Guarantee
Your satisfaction is important to us: Have your equipment installed by a factory-trained technician or Atlas-approved vendor to qualify for our return policy.See our Terms and Conditions of Sale for details.