SKU: 95591
Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: This product is pre-owned and may not include the same accessories as a new, unused unit. - other accessories not shown or listed here.Levelled the sterilizer for proper chamber water filling, connected it to a 120 volt power source, added distilled water and proceeded to test it. Ran this autoclave through cycles of 250 F for 30 minutes and 270 F for 10 minutes several times. To verify that this sterilizer is achieving it's maximum required sterilizing temperature during a cycle, it was temperature tested using a Max Register Thermometer, and found to exceed 270 F during a cycle. Prior to testing this autoclave, the Reservoir Tank on this unit was cleaned and flushed, and a new Condenser Coil, Safety Valve, and Air Jet Valve were installed. Installed a new Door Switch, Door Bellows Assembly and Door Gasket. Installed a new Power Switch and Multi-Purpose Valve. Cleaned the sterilizing trays and rack. Autoclave is fully functioning and in good condition.
Technician Testing Notes
Levelled the sterilizer for proper chamber water filling, connected it to a 120 volt power source, added distilled water and proceeded to test it. Ran this autoclave through cycles of 250 F for 30 minutes and 270 F for 10 minutes several times. To verify that this sterilizer is achieving it's maximum required sterilizing temperature during a cycle, it was temperature tested using a Max Register Thermometer, and found to exceed 270 F during a cycle. Prior to testing this autoclave, the Reservoir Tank on this unit was cleaned and flushed, and a new Condenser Coil, Safety Valve, and Air Jet Valve were installed. Installed a new Door Switch, Door Bellows Assembly and Door Gasket. Installed a new Power Switch and Multi-Purpose Valve. Cleaned the sterilizing trays and rack. Autoclave is fully functioning and in good condition.
Levelled the sterilizer for proper chamber water filling, connected it to a 120 volt power source, added distilled water and proceeded to test it. Ran this autoclave through cycles of 250 F for 30 minutes and 270 F for 10 minutes several times. To verify that this sterilizer is achieving it's maximum required sterilizing temperature during a cycle, it was temperature tested using a Max Register Thermometer, and found to exceed 270 F during a cycle. Prior to testing this autoclave, the Reservoir Tank on this unit was cleaned and flushed, and a new Condenser Coil, Safety Valve, and Air Jet Valve were installed. Installed a new Door Switch, Door Bellows Assembly and Door Gasket. Installed a new Power Switch and Multi-Purpose Valve. Cleaned the sterilizing trays and rack. Autoclave is fully functioning and in good condition.
Product Condition
- Manufacturer: Tuttnauer
- Model: 1730 MKV Valueklave
- Serial Number: 1212510
- Power Requirements: 120V
- Year: 2012
- Sterilizer Type: steam chamber
- Timer Function: features a basic timer with one timing option
- Controls: analog control knobs
- Chamber Depth: 30 cm
- Chamber Diameter: 17 cm
- Number of Trays: 3 trays
- Cycle Count: Does not specify.
Item Includes:
1 Powercord. 1 Sterilizing rack. 3 Sterilizing trays. 1 Operations manual.
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
1 Powercord. 1 Sterilizing rack. 3 Sterilizing trays. 1 Operations manual.
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
Shipping calculated at checkout.
30 Day Return Guarantee
Your satisfaction is important to us: Have your equipment installed by a factory-trained technician or Atlas-approved vendor to qualify for our return policy.See our Terms and Conditions of Sale for details.