Better Selection

on used dental equipment

SKU: 92621
Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
  • Load image into Gallery viewer, Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
  • Load image into Gallery viewer, Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
  • Load image into Gallery viewer, Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
  • Load image into Gallery viewer, Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
  • Load image into Gallery viewer, Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
  • Load image into Gallery viewer, Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
  • Load image into Gallery viewer, Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit
  • Load image into Gallery viewer, Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit

Tuttnauer EZ9 Year 2006 Autoclave Dental Digital Steam Sterilizer 120V Unit

Regular price
$2,400.00
Sale price
$2,400.00
Regular price
Sold out
Unit price
per 

Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.

Your purchase will NOT include: This product is pre-owned and may not include the same accessories as a new, unused unit. - other accessories not shown or listed here.
Levelled the sterilizer for proper sterilizing chamber water filling, connected it to a 120 volt power source, added distilled water and then proceeded to calibrated the autoclave's temperature and pressure sensors. Calibration was successful, commenced to test it's functionality. Ran the autoclave through all it's preset sterilizing and drying cycles several times, checking for any obvious issues. None were found. Tested the unit's ability to achieve the maximum required sterilizing temperature during a cycle, using a Max Register Thermometer, and found the sterilizer maintained the required 273 F for an entire sterilization cycle. Prior to testing the autoclave, the sterilizer's Reservoir Tank was cleaned and flushed, and a new Condenser Coil, Safety Valve Holder, Safety Valve, Air Trap Jet and Reservoir Cap were installed. The Water Pump Filter was cleaned and a new Chamber Filter was installed. Cleaned the autoclave's sterilizing chamber and installed a new Door Seal and Door Bellows Assembly. Cleaned all the Sterilizing Trays and Rack. Also installed into this sterilizer were a HEPA Air Drying Filter w/ Cap, Fill Valve, Vent Valve, Exhaust Valve and Air Drying Valve Solenoids.
Technician Testing Notes
Levelled the sterilizer for proper sterilizing chamber water filling, connected it to a 120 volt power source, added distilled water and then proceeded to calibrated the autoclave's temperature and pressure sensors. Calibration was successful, commenced to test it's functionality. Ran the autoclave through all it's preset sterilizing and drying cycles several times, checking for any obvious issues. None were found. Tested the unit's ability to achieve the maximum required sterilizing temperature during a cycle, using a Max Register Thermometer, and found the sterilizer maintained the required 273 F for an entire sterilization cycle. Prior to testing the autoclave, the sterilizer's Reservoir Tank was cleaned and flushed, and a new Condenser Coil, Safety Valve Holder, Safety Valve, Air Trap Jet and Reservoir Cap were installed. The Water Pump Filter was cleaned and a new Chamber Filter was installed. Cleaned the autoclave's sterilizing chamber and installed a new Door Seal and Door Bellows Assembly. Cleaned all the Sterilizing Trays and Rack. Also installed into this sterilizer were a HEPA Air Drying Filter w/ Cap, Fill Valve, Vent Valve, Exhaust Valve and Air Drying Valve Solenoids.
Product Condition
  • Manufacturer: Tuttnauer
  • Model: EZ9
  • Serial Number: 2602799
  • Power Requirements: 120V
  • Year: 2006
  • Sterilizer Type: steam chamber
  • Timer Function: features a timer with a variety of cycle options
  • Controls: digital control display
  • Chamber Depth: 40 cm
  • Chamber Diameter: 23 cm
  • Number of Trays: 3 trays
  • Cycle Count: 6,600
Item Includes:
1 - Tuttnauer EZ9 Autoclave Steam Sterilizer, 3 - Sterilizing Trays w/ Rack, 1 - Drain Hose and 1 - Power Cord.

Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
Shipping calculated at checkout.

30 Day Return Guarantee

Your satisfaction is important to us: Have your equipment installed by a factory-trained technician or Atlas-approved vendor to qualify for our return policy.See our Terms and Conditions of Sale for details.