SKU: 111721
Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: - other accessories not shown or listed here.This is a 2013 Model with 1,200 cycles run on it. This autoclave was run through an initial functionality test to verify that the major components were working, then it was disassembled down to the bare chassis, cleaned, rebuilt and refurbished. Removed and rebuilt the Door Latch assembly to insure proper operation. Cleaned Reservoir Tank and installed a new Drain Hose and Condenser Coil. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Panel, Steam Block, Door Gasket, Dam Gasket, and Heating Element. Installed a new Top Panel and Keypad. Installed a new Safety Valve and Wiring Harness. Cleaned the Sterilizing Trays and Rack. Then testing proceeded on this test the sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.
Technician Testing Notes
This is a 2013 Model with 1,200 cycles run on it. This autoclave was run through an initial functionality test to verify that the major components were working, then it was disassembled down to the bare chassis, cleaned, rebuilt and refurbished. Removed and rebuilt the Door Latch assembly to insure proper operation. Cleaned Reservoir Tank and installed a new Drain Hose and Condenser Coil. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Panel, Steam Block, Door Gasket, Dam Gasket, and Heating Element. Installed a new Top Panel and Keypad. Installed a new Safety Valve and Wiring Harness. Cleaned the Sterilizing Trays and Rack. Then testing proceeded on this test the sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.
This is a 2013 Model with 1,200 cycles run on it. This autoclave was run through an initial functionality test to verify that the major components were working, then it was disassembled down to the bare chassis, cleaned, rebuilt and refurbished. Removed and rebuilt the Door Latch assembly to insure proper operation. Cleaned Reservoir Tank and installed a new Drain Hose and Condenser Coil. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Panel, Steam Block, Door Gasket, Dam Gasket, and Heating Element. Installed a new Top Panel and Keypad. Installed a new Safety Valve and Wiring Harness. Cleaned the Sterilizing Trays and Rack. Then testing proceeded on this test the sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.
Product Condition
- Manufacturer: Midmark
- Model: M11 AutoClave
- Serial Number: V1382532
- Power Requirements: 115V
- Year: 2013
- Sterilizer Type: steam chamber
- Timer Function: features a timer with a variety of cycle options
- Controls: digital control display
- Chamber Depth: 18"
- Chamber Diameter: 11"
- Number of Trays: 4 trays
- Cycle Count: 1,200
Item Includes:
1 - Midmark M11 AutoClave Steam Sterilizer 4 - Sterilizing Trays w/ Rack 1 - Power Cord
Item Excludes:
1 - Midmark M11 AutoClave Steam Sterilizer 4 - Sterilizing Trays w/ Rack 1 - Power Cord
Item Excludes:
Shipping calculated at checkout.
Need your order to deliver by a specific date? Contact our team for a guaranteed delivery quote.
30 Day Return Guarantee
Your satisfaction is important to us: Have your equipment installed by a factory-trained technician or Atlas-approved vendor to qualify for our return policy.See our Terms and Conditions of Sale for details.