SKU: 109679
Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: - other accessories not shown or listed here.This Autoclave is a 2021 model with 550 cycles run in it. An initial functionality test was done on this sterilizer, and all the major components were found to be functional. then this autoclave was disassembled down to the bare chassis, cleaned, rebuilt and refurbished. The Door Latch assembly was disassembled, cleaned and rebuilt, and was tested to insure proper opening of the chamber door during the dry cycle. Installed a new Drain Hose and Condenser Coil. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Gasket, Dam Gasket, Heating Element, and Mesh Water Filters. Cleaned the Sterilizing Trays and Rack. Then proceeded to test the sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle
Technician Testing Notes
This Autoclave is a 2021 model with 550 cycles run in it. An initial functionality test was done on this sterilizer, and all the major components were found to be functional. then this autoclave was disassembled down to the bare chassis, cleaned, rebuilt and refurbished. The Door Latch assembly was disassembled, cleaned and rebuilt, and was tested to insure proper opening of the chamber door during the dry cycle. Installed a new Drain Hose and Condenser Coil. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Gasket, Dam Gasket, Heating Element, and Mesh Water Filters. Cleaned the Sterilizing Trays and Rack. Then proceeded to test the sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle
This Autoclave is a 2021 model with 550 cycles run in it. An initial functionality test was done on this sterilizer, and all the major components were found to be functional. then this autoclave was disassembled down to the bare chassis, cleaned, rebuilt and refurbished. The Door Latch assembly was disassembled, cleaned and rebuilt, and was tested to insure proper opening of the chamber door during the dry cycle. Installed a new Drain Hose and Condenser Coil. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Gasket, Dam Gasket, Heating Element, and Mesh Water Filters. Cleaned the Sterilizing Trays and Rack. Then proceeded to test the sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle
Product Condition
- Manufacturer: Midmark
- Model: M9
- Serial Number: V2356801
- Power Requirements: 115V
- Year: 2021
- Sterilizer Type: Autoclave (Steam Sterilizer)
- Timer Function: features a timer with a variety of cycle options
- Controls: digital control display
- Chamber Depth: 9"
- Chamber Diameter: 14"
- Number of Trays: 4 trays
- Cycle Count: 550
Item Includes:
1 - Midmark M9 Automatic Sterilizer 4 - Sterilizing Trays w/ Rack 1 - Power Cord
Item Excludes:
1 - Midmark M9 Automatic Sterilizer 4 - Sterilizing Trays w/ Rack 1 - Power Cord
Item Excludes:
Shipping calculated at checkout.
Need your order to deliver by a specific date? Contact our team for a guaranteed delivery quote.
30 Day Return Guarantee
Your satisfaction is important to us: Have your equipment installed by a factory-trained technician or Atlas-approved vendor to qualify for our return policy.See our Terms and Conditions of Sale for details.