Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.

Your purchase will NOT include: - other accessories not shown or listed here.
This autoclave was put through an initial functionality test, to prove that it does indeed work. Once it was proven to operate correctly, it was disassembled down to it's bare chassis and cleaned and then reassembled and refurbished. As part of this autoclaves refurbishment, preventive maintenance parts were installed, which include, a new Air Valve, Check Valve, Biological Filter and Compressor Air Filter. The Reservoir Tank was cleaned and flushed and a new Reservoir Cap, Reservoir Filter and Water Pump Filter were installed. A new Display and Keypad were installed. The sterilizing cassette was also cleaned and a new Cassette Seal was installed. Because this autoclave has been refurbished by Atlas, it includes a Preventive Maintenance Kit (PM). Which includes a new Cassette Seal, Biological Air Filter and a Compressor Air Filter. This PM kit can be installed by the owner. It should be installed after 500 sterilizing cycles have been run on the autoclave, or after 6 months of usage. Prior to running test cycles on this sterilizer, the temperature sensors were calibrated. Then this autoclave was tested through all it's preset sterilizing and drying cycles multiple times. To verify that this unit is achieving it's highest maximum required sterilization temperature, it was tested using a Max Register Thermometer and found to exceed 273 F while running a sterilization cycle.