SKU: 107515
Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: This product is pre-owned and may not include the same accessories as a new, unused unit. - other accessories not shown or listed here.Prior to testing, this autoclave had it's Reservoir Tank cleaned and flushed, and a new Reservoir Cap, Safety Valve, Air Jet Valve and Condenser Coil were installed. Cleaned the sterilizing chamber and installed a new Door Switch, Door Bellows Assembly and Door Seal. Installed a new Timer, Power Switch, Power Indicator Light and Multi-Purpose Valve. Cleaned the sterilizing trays and rack. Levelled the autoclave for proper chamber filling, connected it to a 120 volt power source, added distilled water, and then proceeded to run test cycles on the sterilizer. Ran the autoclave through cycles of 250 F for 30 minutes and 270 F for 10 minutes several times. To verify that this sterilizer is achieving it's required maximum sterilizing temperature, it was tested using a Max Register Thermometer, and found to exceed the required 270 F during a sterilization cycle.
Technician Testing Notes
Prior to testing, this autoclave had it's Reservoir Tank cleaned and flushed, and a new Reservoir Cap, Safety Valve, Air Jet Valve and Condenser Coil were installed. Cleaned the sterilizing chamber and installed a new Door Switch, Door Bellows Assembly and Door Seal. Installed a new Timer, Power Switch, Power Indicator Light and Multi-Purpose Valve. Cleaned the sterilizing trays and rack. Levelled the autoclave for proper chamber filling, connected it to a 120 volt power source, added distilled water, and then proceeded to run test cycles on the sterilizer. Ran the autoclave through cycles of 250 F for 30 minutes and 270 F for 10 minutes several times. To verify that this sterilizer is achieving it's required maximum sterilizing temperature, it was tested using a Max Register Thermometer, and found to exceed the required 270 F during a sterilization cycle.
Prior to testing, this autoclave had it's Reservoir Tank cleaned and flushed, and a new Reservoir Cap, Safety Valve, Air Jet Valve and Condenser Coil were installed. Cleaned the sterilizing chamber and installed a new Door Switch, Door Bellows Assembly and Door Seal. Installed a new Timer, Power Switch, Power Indicator Light and Multi-Purpose Valve. Cleaned the sterilizing trays and rack. Levelled the autoclave for proper chamber filling, connected it to a 120 volt power source, added distilled water, and then proceeded to run test cycles on the sterilizer. Ran the autoclave through cycles of 250 F for 30 minutes and 270 F for 10 minutes several times. To verify that this sterilizer is achieving it's required maximum sterilizing temperature, it was tested using a Max Register Thermometer, and found to exceed the required 270 F during a sterilization cycle.
Product Condition
- Manufacturer: Tuttnauer
- Model: 1730 MK Valueklave
- Serial Number: 1010898
- Power Requirements: 120V
- Year: 2011
- Timer Function: Not available
- Controls: Not available
- Cycle Count: Not available
- Software Version:
Item Includes:
1 - Tuttnauer 1730MKV ValueKlave 3 - Sterilizing Trays w/ Rack 1 - Drain Hose 1 - Power Cord
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
1 - Tuttnauer 1730MKV ValueKlave 3 - Sterilizing Trays w/ Rack 1 - Drain Hose 1 - Power Cord
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
Shipping calculated at checkout.
Need your order to deliver by a specific date? Contact our team for a guaranteed delivery quote.
30 Day Return Guarantee
Your satisfaction is important to us: Have your equipment installed by a factory-trained technician or Atlas-approved vendor to qualify for our return policy.See our Terms and Conditions of Sale for details.