Used Dental Amalgamator | Caulk Dentsply ProMix 400

The Dentsply ProMix 400 amalgamator is used for the mixing of dental alloys, capsule-delivered temporary filling materials, and oral cements.

Features: 
  • 2 preset speeds
  • LED display indicates mixing frequency (high or low)
  • Safety switch
  • Thermally-protected motor
  • Preset cycle time: maximum of 30 seconds in 1 second increments
  • Digital LCD display
  • Manual cycle interruption capability
  • Microprocessor controls provide a consistent mix
  • Touchpad controls
  • Programmable settings for one touch material mixing
  • Spring-tensioned capsule holder
  • Mixing time can easily be set using touchpad
Benefits: 
  • Smooth and quiet operation
  • Consistent mixing speed
  • Mixing frequencies at low and high settings are extremely accurate
  • Exhibits little vibration during operation
  • Unit will not operate if door to mixing chamber is open
  • Unit's design facilitates cleaning/disinfection
Limitations/Considerations: 
  • The ProMix amalgamator should not be used in cases where a patient or user of the ProMix has been fitted with an implanted heart acemaker and has been cautioned against the use of small electrical appliances (such as electric shavers, hair dryers, etc.)
  • The ProMix amalgamator is not suitable for use in the presence of a flammable anesthetic mixture with air or with nitrous oxide.
Technical Specifications: 
  • Power requirements: 120V, 50/60Hz, 2.0A
  • Motor rating: 115VAC, 60Hz
  • Preset motor speeds: Low (Turtle) 3700 ± 200 rpm & High (Rabbit) 4200 ± 200 rpm
  • Dimensions (inches): 5 x 9 x 9.5
  • Weight (lb.): 7