Used Dental Handpieces | NSK TI-MAX Z45L
The NSK Ti-Max Z45L is intended for transmitting rotation of the power source at the direct drive ratio or at a different gear ratio, thereby running the instrument such as a bur or a reamer to cut and polish natural or artificial teeth during dental treatment.
Features:
- Titanium Body with Scratch-Resistant DURACOAT
- Cellular Glass Optics
- Ceramic Bearings
- Clean Head System
- Push Button Chuck
- Quattro Spray (Water Jet / Mist)
- Microfilter
- Anti Heat System
- 45-degree angled head
- Two-Way Spray Function
- Takes from Standard Bur (20mm) to Long Bur (25mm)
Benefits:
- Superior Accessibility
- Alows easy access to the molar region, minimizing interference from the front teeth and adjacent teeth.
- Allows you to instantly choose a mist or jet spray depending on the conditions and procedure with an enclosed dedicated tool
- water jet spray prevents subcutaneous emphysema in surgical procedures
- Ti-Max Z45L is versatile
Limitations/Considerations:
Do not use the handpiece for prophylaxis purposes. Polishing paste could enter the handpiece, causing the failure of the Push Button or burn injuries due to the overheating of the handpiece head.
Technical Specifications:
-
Max. Rotation Speed (Motor) : 40,000 min
-
Max. Rotation Speed (Handpiece): 168,000 min
-
Gear Ratio: 1:4.2 Increasing
-
Chuck Length: 11.6mm
-
Max. Bur Lenqth: 25mm
-
Optic: Glass Rod
-
Coolant Water Type: Water Spray or Water Jet (switch-selectable)
-
Water Consumption: Min. 50ml./min (0.2MPa)
-
Chip Air Consumption: Min. 1.5L/min (0.2MPa)
-
Use Environment: Temperature: 10 - 40°C, Humidity: 30 - 75% (No Condensation)
RELATED EQUIPMENT
