Used Dental Laser Dentistry | Biolase iLase

The iLase dental laser is a surgical device designed for a wide variety of dental soft-tissue procedures. Several types of tips are available for use with the iLase to perform different procedures.

Features: 
  • ComfortPulse mode of operation
  • Delivers 5 watts of peak laser power
  • Up to 3 watts of continuous laser power
  • Operates without cords, outlets, or foot pedals
  • Wrap-around finger switch accessible from any angle in the oral cavity
  • "Standby" & "Ready Mode" protection
  • Fully autoclavable for easy infection control
  • Performs 24 soft-tissue and hygiene procedures
  • Uses Biolase’s full range of bendable tips 
Benefits: 
  • Hassle-free and tangle-free
  • Increased productivity
  • Balanced and ergonomic design for the ultimate in comfort

 

Limitations/Considerations: 
  • All persons present in the operatory must wear protective laser eyewear for the laser wavelength of 940nm.
  • Do not aim the laser at metallic or reflective surfaces such as surgical instruments or dental mirrors. Laser beam reflections from these surfaces create a potential hazard.
  • Do not look directly into the beam or at specular reflections. Never direct or point the beam at anyone’s eyes.
  • Do not operate this device in the presence of explosive or flammable materials. Flammable anesthetics or oxidizing gases such as nitrous oxide (N2O) and oxygen (O2) should be avoided. Solvents of adhesives and flammable solutions used for cleaning and disinfecting should be allowed to evaporate before laser is used. Attention should also be drawn to the danger of ignition of endogenous gases.
Technical Specifications: 
  • Dimensions : Charging Station (W X D X H): 4.7” X 4.0” X 2.8”
  • iLase Handpiece with surgical tip and battery attached (Length X Diameter): 8.1” X 0.75”
  • Power Supply (W X D X H): 1.77” X 2.36” X 2.26”
  • Weight : iLase Complete System: 1.89 lbs
  • iLase Charging Station: 0.87 lbs
  • iLase with Battery attached: 0.22 lbs
  • iLase Charging Station PowerSupply and cord/plug set: 0.62 lbs
  • Electrical : Voltage (to power supply): 90 – 230 VAC
  • Amperage (max): 0.8A
  • Frequency: 50 – 60 Hz
  • Electrostatic Discharge Immunity: Up to 10 KV (per IEC 60601)
  • Battery: Lithium ion 3.7 V 800 mAh
  • Recharge Time (fully discharged): 2 hours
  • Safety: Discharge over current sensor and resettable circuit breaker
  • Laser : Laser Class : IV (4)
  • Wavelength: 940 nm ± 10nm
  • Output Power: 3.0 W Max CW / 5.0 W Peak Power (Pulse Mode)
  • Power Accuracy: ± 20%
  • Pulse Duration: Continuous | 0.1 ms | 1 ms
  • Pulse Interval: | 0.2 ms | 1 ms
  • Aiming Beam: Laser diode, max 1 mW, 625-670nm, Class 1
  • N.O.H.D.: 2.61 meters
  • Environmental : Temperature - Operating: 68° – 77° F (20° – 25° C)
  • Temperature - Storage: 59° – 90° F (15° – 35° C)
  • Humidity - Operating: 15 – 95 % non-condensing
  • Humidity - Storage: 10 – 70 % non-condensing
  • Altitude - Operating: Maximum 10,000 ft (3048 m)
  • Altitude - Storage: Maximum 12,000 ft (3658 m)