SKU: 112191
Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: - other accessories not shown or listed here.This autoclave is a 2010 model with 3,125 cycles run on it. It was run through an initial functionality test to verify that all the major components were functioning. Then it was disassembled down to the bare chassis, cleaned, rebuilt and refurbished. Removed and rebuilt the Door Latch assembly to insure proper door operation. Cleaned Reservoir Tank and installed a new Drain Hose and Condenser Coil. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Panel, Steam Block, Door Gasket, Dam Gasket, Heating Element, and Mesh Water Filters. Installed a new Top Panel and Keypad. Cleaned the Sterilizing Trays and Rack. Then testing proceeded on this sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.
Technician Testing Notes
This autoclave is a 2010 model with 3,125 cycles run on it. It was run through an initial functionality test to verify that all the major components were functioning. Then it was disassembled down to the bare chassis, cleaned, rebuilt and refurbished. Removed and rebuilt the Door Latch assembly to insure proper door operation. Cleaned Reservoir Tank and installed a new Drain Hose and Condenser Coil. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Panel, Steam Block, Door Gasket, Dam Gasket, Heating Element, and Mesh Water Filters. Installed a new Top Panel and Keypad. Cleaned the Sterilizing Trays and Rack. Then testing proceeded on this sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.
This autoclave is a 2010 model with 3,125 cycles run on it. It was run through an initial functionality test to verify that all the major components were functioning. Then it was disassembled down to the bare chassis, cleaned, rebuilt and refurbished. Removed and rebuilt the Door Latch assembly to insure proper door operation. Cleaned Reservoir Tank and installed a new Drain Hose and Condenser Coil. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Panel, Steam Block, Door Gasket, Dam Gasket, Heating Element, and Mesh Water Filters. Installed a new Top Panel and Keypad. Cleaned the Sterilizing Trays and Rack. Then testing proceeded on this sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.
Product Condition
- Manufacturer: Midmark
- Model: M9
- Serial Number: V207908
- Power Requirements: 120V
- Year: 2010
- Sterilizer Type: Autoclave (Steam Sterilizer)
- Timer Function: features a timer with a variety of cycle options
- Controls: digital control display
- Chamber Depth: 14"
- Chamber Diameter: 9"
- Number of Trays: 4 trays
- Cycle Count: 3,125
- Software Version: 1.0.4
Item Includes:
1 - Midmark M9 Automatic Autoclave 4 - Sterilizing Trays w/ Rack 1 - Power Cord
Item Excludes:
1 - Midmark M9 Automatic Autoclave 4 - Sterilizing Trays w/ Rack 1 - Power Cord
Item Excludes:
Shipping calculated at checkout.
Need your order to deliver by a specific date? Contact our team for a guaranteed delivery quote.
30 Day Return Guarantee
Your satisfaction is important to us: Have your equipment installed by a factory-trained technician or Atlas-approved vendor to qualify for our return policy.See our Terms and Conditions of Sale for details.