SKU: 102517
Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: Manaul Tray HolderThis product is pre-owned and may not include the same accessories as a new, unused unit. - other accessories not shown or listed here.Visually inspected the unit for any damaged or missing parts and accessories. Cleaned the Reservoir Tank and installed a new Condenser Coil. Installed a new Fill and Vent Valve Solenoid and Steam Bellows. Installed a new Display Overlay and Warning Label. Installed a new Door Panel, Door Gasket, Dam Gasket and Mesh Water Filter. Cleaned the sterilizing chamber, sterilizing trays and rack. To test this autoclave, it was connected to a 120 volt power source, distilled water was added and then the control board was calibrated. The calibration proved to be successful, I then began running cycles on the unit. Ran this autoclave through all it's preset sterilizing and drying cycles several times. To verify that it is achieving it's required maximum sterilizing temperature during a cycle, it was tested using a Max Register Thermometer, and found to exceed 273 F for an entire cycle.
Technician Testing Notes
Visually inspected the unit for any damaged or missing parts and accessories. Cleaned the Reservoir Tank and installed a new Condenser Coil. Installed a new Fill and Vent Valve Solenoid and Steam Bellows. Installed a new Display Overlay and Warning Label. Installed a new Door Panel, Door Gasket, Dam Gasket and Mesh Water Filter. Cleaned the sterilizing chamber, sterilizing trays and rack. To test this autoclave, it was connected to a 120 volt power source, distilled water was added and then the control board was calibrated. The calibration proved to be successful, I then began running cycles on the unit. Ran this autoclave through all it's preset sterilizing and drying cycles several times. To verify that it is achieving it's required maximum sterilizing temperature during a cycle, it was tested using a Max Register Thermometer, and found to exceed 273 F for an entire cycle.
Visually inspected the unit for any damaged or missing parts and accessories. Cleaned the Reservoir Tank and installed a new Condenser Coil. Installed a new Fill and Vent Valve Solenoid and Steam Bellows. Installed a new Display Overlay and Warning Label. Installed a new Door Panel, Door Gasket, Dam Gasket and Mesh Water Filter. Cleaned the sterilizing chamber, sterilizing trays and rack. To test this autoclave, it was connected to a 120 volt power source, distilled water was added and then the control board was calibrated. The calibration proved to be successful, I then began running cycles on the unit. Ran this autoclave through all it's preset sterilizing and drying cycles several times. To verify that it is achieving it's required maximum sterilizing temperature during a cycle, it was tested using a Max Register Thermometer, and found to exceed 273 F for an entire cycle.
Product Condition
- Manufacturer: Midmark
- Model: M9
- Serial Number: CZ012150
- Power Requirements: 120V
- Year: 2002
- Timer Function: Not available
- Controls: Not available
- Cycle Count: Not available
- Software Version:
Item Includes:
1 - Midmark M9 Autoclave 4 - Sterilizing Trays w/ Rack 1 - Attached Power Cord
Item Excludes:
Manaul Tray HolderThis product is pre-owned and may not include the same accessories as a new, unused unit.
1 - Midmark M9 Autoclave 4 - Sterilizing Trays w/ Rack 1 - Attached Power Cord
Item Excludes:
Manaul Tray HolderThis product is pre-owned and may not include the same accessories as a new, unused unit.
Shipping calculated at checkout.
30 Day Return Guarantee
Your satisfaction is important to us: Have your equipment installed by a factory-trained technician or Atlas-approved vendor to qualify for our return policy.See our Terms and Conditions of Sale for details.