SKU: 105473
Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: - other accessories not shown or listed here.Prior to testing this autoclave, it was disassembled down to the bare chassis, cleaned, rebuilt and refurbished. Removed and rebuilt the Door Latch assembly. Cleaned Reservoir Tank and installed a new Drain Hose and Condenser Coil. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Gasket, Dam Gasket, Heating Element, and Mesh Water Filters. Installed a new Keypad. Cleaned the Sterilizing Trays and Rack. Then proceeded to test the sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.-
Technician Testing Notes
Prior to testing this autoclave, it was disassembled down to the bare chassis, cleaned, rebuilt and refurbished. Removed and rebuilt the Door Latch assembly. Cleaned Reservoir Tank and installed a new Drain Hose and Condenser Coil. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Gasket, Dam Gasket, Heating Element, and Mesh Water Filters. Installed a new Keypad. Cleaned the Sterilizing Trays and Rack. Then proceeded to test the sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.-
Prior to testing this autoclave, it was disassembled down to the bare chassis, cleaned, rebuilt and refurbished. Removed and rebuilt the Door Latch assembly. Cleaned Reservoir Tank and installed a new Drain Hose and Condenser Coil. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Gasket, Dam Gasket, Heating Element, and Mesh Water Filters. Installed a new Keypad. Cleaned the Sterilizing Trays and Rack. Then proceeded to test the sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.-
Product Condition
- Manufacturer: Midmark
- Model: M9 New Body Style
- Serial Number: V296565
- Power Requirements: 120V
- Year: Not available
- Timer Function: Not available
- Controls: Not available
- Cycle Count: Not available
- Software Version:
30 Day Return Guarantee
Your satisfaction is important to us: Have your equipment installed by a factory-trained technician or Atlas-approved vendor to qualify for our return policy.See our Terms and Conditions of Sale for details.