SKU: 112309
Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: This product is pre-owned and may not include the same accessories as a new, unused unit. - other accessories not shown or listed here.This autoclave is a 2008 model with less than 425 cycles run on it. It was run through an initial functionality test to verify that all the major components were functioning. Removed and rebuilt the Door Latch assembly to insure proper door operation. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Gasket, Dam Gasket, and Mesh Water Filters. Cleaned the Sterilizing Trays and Rack. This sterilizer has a cracks in the bottom left side of the door panel. The cracks were filled with epoxy glue and repaired form the inside of the panel. This condition does not effect the operation of the autoclave. Then testing proceeded on this sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.
Technician Testing Notes
This autoclave is a 2008 model with less than 425 cycles run on it. It was run through an initial functionality test to verify that all the major components were functioning. Removed and rebuilt the Door Latch assembly to insure proper door operation. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Gasket, Dam Gasket, and Mesh Water Filters. Cleaned the Sterilizing Trays and Rack. This sterilizer has a cracks in the bottom left side of the door panel. The cracks were filled with epoxy glue and repaired form the inside of the panel. This condition does not effect the operation of the autoclave. Then testing proceeded on this sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.
This autoclave is a 2008 model with less than 425 cycles run on it. It was run through an initial functionality test to verify that all the major components were functioning. Removed and rebuilt the Door Latch assembly to insure proper door operation. Installed a new Fill / Vent Valve Manifold Assembly and Air Valve Solenoid. Installed a new Door Gasket, Dam Gasket, and Mesh Water Filters. Cleaned the Sterilizing Trays and Rack. This sterilizer has a cracks in the bottom left side of the door panel. The cracks were filled with epoxy glue and repaired form the inside of the panel. This condition does not effect the operation of the autoclave. Then testing proceeded on this sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.
Product Condition
- Manufacturer: Midmark
- Model: M11D
- Serial Number: V539512
- Power Requirements: 115V
- Year: 2008
- Sterilizer Type: steam chamber
- Timer Function: features a timer with a variety of cycle options
- Controls: digital control display
- Chamber Depth: 18"
- Chamber Diameter: 11"
- Number of Trays: 4 trays
- Cycle Count: 425
Item Includes:
1 - Ritter M11D Autoclave Steam Sterilizer 4 - Sterilizing Trays w/ Rack 1 - Power Cord
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
1 - Ritter M11D Autoclave Steam Sterilizer 4 - Sterilizing Trays w/ Rack 1 - Power Cord
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
Shipping calculated at checkout.
Need your order to deliver by a specific date? Contact our team for a guaranteed delivery quote.
30 Day Return Guarantee
Your satisfaction is important to us: Have your equipment installed by a factory-trained technician or Atlas-approved vendor to qualify for our return policy.See our Terms and Conditions of Sale for details.