SKU: 105410
Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: This product is pre-owned and may not include the same accessories as a new, unused unit. - other accessories not shown or listed here.This autoclave was inspected internally and externally, any issues found during the inspection were corrected. Then the Reservoir Tank was cleaned and flushed an a new Condenser Coil, Safety Valve, Safety Valve Holder, Air Jet Valve and Reservoir Cap. Cleaned the Sterilizing Chamber and installed a new Door Bellows Assembly and Door Seal. Cleaned the Sterilizing Trays and Rack. To test this autoclave, it was levelled to ensure proper chamber filling. Then it was connected to a 120 volt power source and distilled water was added. It was than run through sterilizing cycles of 250 F for 30 minutes, and 270 F for 10 minutes several times. To verify that this autoclave is achieving it's maximum required sterilizing temperature, it was tested using a Max Register Thermometer, and found to exceed 273 F during a sterilization cycle.
Technician Testing Notes
This autoclave was inspected internally and externally, any issues found during the inspection were corrected. Then the Reservoir Tank was cleaned and flushed an a new Condenser Coil, Safety Valve, Safety Valve Holder, Air Jet Valve and Reservoir Cap. Cleaned the Sterilizing Chamber and installed a new Door Bellows Assembly and Door Seal. Cleaned the Sterilizing Trays and Rack. To test this autoclave, it was levelled to ensure proper chamber filling. Then it was connected to a 120 volt power source and distilled water was added. It was than run through sterilizing cycles of 250 F for 30 minutes, and 270 F for 10 minutes several times. To verify that this autoclave is achieving it's maximum required sterilizing temperature, it was tested using a Max Register Thermometer, and found to exceed 273 F during a sterilization cycle.
This autoclave was inspected internally and externally, any issues found during the inspection were corrected. Then the Reservoir Tank was cleaned and flushed an a new Condenser Coil, Safety Valve, Safety Valve Holder, Air Jet Valve and Reservoir Cap. Cleaned the Sterilizing Chamber and installed a new Door Bellows Assembly and Door Seal. Cleaned the Sterilizing Trays and Rack. To test this autoclave, it was levelled to ensure proper chamber filling. Then it was connected to a 120 volt power source and distilled water was added. It was than run through sterilizing cycles of 250 F for 30 minutes, and 270 F for 10 minutes several times. To verify that this autoclave is achieving it's maximum required sterilizing temperature, it was tested using a Max Register Thermometer, and found to exceed 273 F during a sterilization cycle.
Product Condition
- Manufacturer: Tuttnauer
- Model: 1730MKV ValueKlave
- Serial Number: 2807729
- Power Requirements: 120V
- Year: 2009
- Timer Function: Not available
- Controls: Not available
- Cycle Count: Not available
- Software Version:
Item Includes:
1 - Tuttnauer 1730MKV ValueKlave 3 - Sterilizing Trays w/ Rack 1 - Drain Hose 1 - Power Cord 1 - Operations and Maintenance Manual
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
1 - Tuttnauer 1730MKV ValueKlave 3 - Sterilizing Trays w/ Rack 1 - Drain Hose 1 - Power Cord 1 - Operations and Maintenance Manual
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
Shipping calculated at checkout.
30 Day Return Guarantee
Your satisfaction is important to us: Have your equipment installed by a factory-trained technician or Atlas-approved vendor to qualify for our return policy.See our Terms and Conditions of Sale for details.