SKU: 100636
Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: This product is pre-owned and may not include the same accessories as a new, unused unit. - other accessories not shown or listed here.Before this autoclave was tested, the Reservoir Tank was cleaned and flushed and a new Air Jet Valve, Safety Valve and Reservoir Cap were installed. Installed a new Door Gasket. Installed a new HEPA Air Drying Filter and Cap. Cleaned the sterilizing trays and rack. To test this sterilizer, it was connected to a 230 volt power source, distilled water was added to the reservoir and the Pressure and Temperature Sensors were calibrated. Then the autoclave was run through all it's preset sterilizing and drying cycles several times. To verify that it is achieving it's maximum required sterilizing temperature during a cycle, it was tested using a Max Register Thermometer, and found to exceed 273 F for an entire sterilizing cycle.
Technician Testing Notes
Before this autoclave was tested, the Reservoir Tank was cleaned and flushed and a new Air Jet Valve, Safety Valve and Reservoir Cap were installed. Installed a new Door Gasket. Installed a new HEPA Air Drying Filter and Cap. Cleaned the sterilizing trays and rack. To test this sterilizer, it was connected to a 230 volt power source, distilled water was added to the reservoir and the Pressure and Temperature Sensors were calibrated. Then the autoclave was run through all it's preset sterilizing and drying cycles several times. To verify that it is achieving it's maximum required sterilizing temperature during a cycle, it was tested using a Max Register Thermometer, and found to exceed 273 F for an entire sterilizing cycle.
Before this autoclave was tested, the Reservoir Tank was cleaned and flushed and a new Air Jet Valve, Safety Valve and Reservoir Cap were installed. Installed a new Door Gasket. Installed a new HEPA Air Drying Filter and Cap. Cleaned the sterilizing trays and rack. To test this sterilizer, it was connected to a 230 volt power source, distilled water was added to the reservoir and the Pressure and Temperature Sensors were calibrated. Then the autoclave was run through all it's preset sterilizing and drying cycles several times. To verify that it is achieving it's maximum required sterilizing temperature during a cycle, it was tested using a Max Register Thermometer, and found to exceed 273 F for an entire sterilizing cycle.
Product Condition
- Manufacturer: Tuttnauer
- Model: EZ10K
- Serial Number: 15070596
- Power Requirements: 230 volt
- Year: 2015
- Sterilizer Type: steam chamber
- Timer Function: features a timer with a variety of cycle options
- Controls: digital control display
- Chamber Depth: 40 cm
- Chamber Diameter: 25 cm
- Number of Trays: 4 trays
- Cycle Count: 4,400
Item Includes:
1 - Tuttnauer EZ10K 230 Volt Autoclave - Steam Sterilizer 4 - Sterilizing Trays w/ Rack 1 - Operation and Maintaince Manual 1 - Drain Hose 1 - Tray Handle 1 - 230 Volt Power Cord
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
1 - Tuttnauer EZ10K 230 Volt Autoclave - Steam Sterilizer 4 - Sterilizing Trays w/ Rack 1 - Operation and Maintaince Manual 1 - Drain Hose 1 - Tray Handle 1 - 230 Volt Power Cord
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
Shipping calculated at checkout.
30 Day Return Guarantee
Your satisfaction is important to us: Have your equipment installed by a factory-trained technician or Atlas-approved vendor to qualify for our return policy.See our Terms and Conditions of Sale for details.