Tuttnauer EZ9 Autoclave Dental Instrument Steam Sterilizer Unit

Condition

MARKS FROM PRIOR USE

Test notes

This autoclave is a 2019 model with 1,800 run in it. It was inspected inside and out for obvious defects, then it was put through an initial functionality test to verify it is in working order. Then it was semi-disassembled to clean. To insure this sterilizers continued operation, preventative maintenance parts were installed, which include, a new Display Control Board, Door Switch, Power Switch, and Door Seal, The Reservoir Tank was cleaned and flushed, and a new Condenser Coil, Safety Valve, and Air Jet Valve were installed. The Chamber and Water Fill Filter were cleaned. Cleaned the Sterilizing Tray and Rack.
Then testing proceeded on this sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. This autoclave was proven to be free of leaks during testing. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.

Shipping (US)

Freight — $299 per freight item.

Ground parcel is free when it ships with freight. Call if you want a delivery quote before checkout.

Ships from Boise, ID.

Need your order to deliver by a specific date? Contact our team for a guaranteed delivery quote.